BRYGD - MIL SPEC POUR (A COMPONENT)
- MSDS: BRYGD
- Manufacturer: INSTA FOAM PRODUCTS INC
- Product Name: MIL SPEC POUR (A COMPONENT)
- National Stock Number: 8135-01-203-5827
Product Identification
Product ID:MIL SPEC POUR (A COMPONENT)
MSDS Date:03/01/1992
FSC:8135
NIIN:01-203-5827
Kit Part:Y
MSDS Number: BRYGD
Responsible Party
JOLIET, IL 60435
US
Emergency Phone: 815-741-6800 EXT 56
Info Phone: 800-800-3626
Preparer: AMY GIRARD
Cage: 54577
Contractor
Telephone: 815-741-6800
Cage: 54577
Ingredients
DIPHENYLMETHANEDIISOCYANATE (MDI), METHYLENE BIS
CAS: 101-68-8
RTECS: NQ9350000
Fraction By Weight: 60-100%
OSHA PEL 0.02 PPM
ACGIH TLV: 0.051 MG/CUM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
HIGHER OLIGOMERS OF MDI, POLYMETHYLENE POLYPHENYLENE
CAS: 9016-87-9
RTECS: TR0350000
Fraction By Weight: 60-100%
FLAME RETARDANT MATERIAL
Fraction By Weight: 10-30%
0 LB/GAL
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITATING TO EYES, SKIN, &
RESPIRATORY TRACT. PRIMARY SENSITIZER.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: COUGHING, WHEEZING, & SHORTNESS OF
BREATH. EYES/SKIN/INHALATION: IRRITATION.
Medical Cond Aggravated by Exposure:ASTHMA, ECZEMA & ALLERGIES
First Aid
First Aid:EYES: FLUSH W/LOW PRESSURE WATER FOR 15 MINS WHILE HOLDING
EYELIDS OPEN. SKIN: WASH W/SOAP & WATER. INHALATION: REMOVE TO
FRESH AIR. INGESTION: DRINK PLENTY OF LIQUIDS. DON'T INDUCE
VOMITING. OBTAIN M EDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:CC
Flash Point:390F, 199C
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS.
2.
Accidental Release
Spill Release Procedures:VENTILATE AREA. WEAR PROTECTIVE EQUIPMENT.
CONTAIN SPILL & COLLECT USING SUITABLE ABSORBENT MATERIAL SUCH AS
SAWDUST OR VERMICULITE. SHOVEL INTO WASTE CONTAINER ADDING
DECONTAMINATE SOLUTION. LEAVE UN COVERED FOR 24 HOURS PRIOR TO
DISPOSAL.
Neutralizing Agent:(90% WATER, 8% AMMONIA & 2% DETERGENT)
Handling
Handling and Storage Precautions:PROTECT CONTAINERS FROM PHYSICAL
ABUSE. AVOID DIRECT SUNLIGHT. STORAGE TEMPERATURES: 60-90F.
(15.5C-32.2C)
Exposure Controls
Respiratory Protection:WEAR SELF-CONTAINED BREATHING APPARATUS
Ventilation:REQUIRED
Protective Gloves:REQUIRED
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
NO TOXICOLOGICAL TESTING HAS BEEN DONE ON THIS MIXTURE.
Chemical Properties
Vapor Pres:<0.00001
Spec Gravity:1.2
Solubility in Water:INSOLUBLE
Appearance and Odor:DARK BROWN, THICK LIQUID W/MUSTY ODOR
Stability
Stability Indicator/Materials to Avoid:YES
ALKALIES, ACIDS, ALCOHOL, AMMONIA. REACTS W/WATER.
Stability Condition to Avoid:DIRECT SUNLIGHT, ELEVATED TEMPERATURES
Hazardous Decomposition Products:CO2, CO, NITROGEN OXIDES, AMMONIA, &
TRACE AMOUNTS OF HYDROGEN CYANIDE
Disposal
Waste Disposal Methods:PRIOR TO DISPOSAL, FOLLOW DECONTAMINATE
PROCEDURES LISTED UNDER ACCIDENTIAL RELEASE MEASURES. DISPOSE OF IN
ACCORDANCE W/FEDERAL, STATE & LOCAL REGULATIONS. RETURNABLE
CYLINDERS NEED TO BE VENTED BELO W 40 PSI BEFORE RETURNING. UN2489.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.